Digga's 2-speed drilling auger drives for high flow machines give you a wider range of application uses.
Offering a high speed, low torque setting for the smaller auger jobs when you need that extra RPM, and low speed, high torque for when you really need to grind out that larger diameter hole. It's like having 2 drive units in 1.
Two speed drives suit excavators & skid steer loaders, truck cranes, front-end loaders, wheeled loaders, and backhoes with flows between 40 and 200 lpm.

• Improved motor design & performance with 2 Speed options:

* Low speed (40 RPM), high torque / High speed (60 RPM), low torque

• Suitable for drilling in different grounds; from soft loose soils to rocky conditions
• Integrated PRV (Pressure Relief Valve)
• Simple electrical connection (12 or 24-volt coil)
• Optional joystick switches, floor mounted switches & cigarette plugs available pre-wired to suit
• 5yr gear box and 3yr motor warranty

SPECIFICATION
Rec Flow Range: 40-200 lpm
Nominal Torque: 32000 Nm
Pressure Valve Fitted: Included
Overall Length: 1217 mm
Diameter: 355 mm
Weight (no frame / hitch): 400 kg
Std Output Shaft: 100 mm Square
Swing Control: Optional
Diggalign: Optional
Rec Auger: A10 / A11
Max Auger Dia Clay / Shale: 1200 mm
Max Auger Dia Earth: 1800 mm