Digga's 2-speed drilling auger drives for standard flow machines give you a wider range of application uses.
Offering a high speed, low torque setting for the smaller auger jobs when you need that extra RPM, and low speed, high torque for when you really need to grind out that larger diameter hole. It's like having 2 drive units in 1.
Two speed drives suit excavators & skid steer loaders, truck cranes, front-end loaders, wheeled loaders, and backhoes with flows between 40 and 200 lpm.

• Improved motor design & performance with 2 Speed options:

* Low speed (40 RPM), high torque / High speed (60 RPM), low torque

• Suitable for drilling in different grounds; from soft loose soils to rocky conditions
• Integrated PRV (Pressure Relief Valve)
• Simple electrical connection (12 or 24-volt coil)
• Optional joystick switches, floor mounted switches & cigarette plugs available pre-wired to suit
• 5yr gearbox and 3yr motor warranty

SPECIFICATION
Rec Flow Range: 15-75 lpm
Nominal Torque: 4600 Nm
Max Pressure: Do not exceed 200 bar @ 76 lpm
Max Flow: Do not exceed 76 lpm @ 200 bar
Max Power: Do not exceed 25 Kw (34 hp)
Pressure Valve Fitted: Included
Overall Length: 877 mm
Diameter: 240 mm
Weight (no frame / hitch): 104 Kg
Std Output Shaft: 75 mm Square
Swing Control: Optional
Diggalign: Optional
Rec Auger: AGS / A6 / A7
Max Auger Dia Clay / Shale: 600 mm
Max Auger Dia Earth: 900 mm